Detect Local Timer and Allow Local Network Access on TMAX Computer

To complete, please follow these steps on your TMAX computer ONLY:

THIS ONLY NEEDS COMPLETED ONCE.

Please do not complete the steps below on secondary computers.

1. Log into your Tan-Link site, navigate to the menus on the left side, select Staff > Timer > Check if Local Timer is selected as shown below.

   

2. If so, STOP. No further action is needed. If not, proceed.
3. Find the 3 dots on the top right of your Google Chrome Window that looks like this

4. Then go to Help > About Google Chrome and verify that you are running the latest version of Chrome. It should look like this and show Chrome is up to date.

   

5. If Chrome is not up to date, you must update it and then click on the Relaunch button to restart Chrome.
6. After Chrome has restarted, go to your site in Tan-Link and login first.

7. In Chrome, click on the double circle line icon to the left of your site name in the address bar that looks like this:

   

8. Then click on Site settings at the bottom

   

9. Scroll all the way down to find Local network access and set that to Allow as shown below:

   

10. Close the Settings window.

11. Log into your Tan-Link site, navigate to the menus on the left side, select Staff > Timer > Detect Timer.  It should select Local Timer as shown below.

    

12. If it does not detect Local Timer, you can stop here and contact Support.
13. If it does select Local Timer, refresh the page and verify that you are able to view and set your beds properly from the TMAX computer. If not, contact Support.